Innova Xt Atlas

13,51 

5 | 4 | 0 | 1

The Atlas is an overmold that combines a firm, low-profile flight plate with a grippy rim. This Mid-Range flies straight with minimal fade, combining accuracy and control with an ergonomic grip. The Atlas performs well for both backhand and forehand throwers forgiving small throwing errors better than any other Mid-Range. The Atlas features four 'compass points' located on the underside of the disc. These ports are where the rim is injected over the flight plate. Myös kiekon loppufeidi on erittäin mieto, eli tämä kiekko toimii loistavasti esimerkiksi “metsäpilleihin” ja ahtaisiin paikkoihin.

Atlas hyödyntää Innovan OverMold-teknologiaa. Käytännössä tämä tarkoittaa sitä, että kiekko on valmistettu kahdesta eri materiaalia olevasta osasta: lentopinta on tukevampaa muovia, kun taas kiekon rimmi on kumimaisempaa pehmeää muovia. Kaksi erillistä osaa on liitetty toisiinsa kemiallisen liitoksen lisäksi 20:llä lukituspisteellä rimmin sisäpuolelta. Nämä kaksi kiinnitysmetodia pitävät Atlaksen eri osa erittäin tukevasti yhdessä niin törmäyksissä kuin kulutuksessakin.

XT is a tough plastic blend that was originally developed for the Nova and Atlas . It worked so well, it spread to other models. Grip is off the charts and durability is almost as good as our premium plastics. XT is firmer than R-Pro, and less firm than KC Pro with a unique grip that feels great in the hand, and inspires confidence when throwing. XT tarkoittaa XTra Tractionia, eli ylivoimaiseen pitoon on tässä muovilaadussa panostettu. Nahkeudesta ja pitävyydestä huolimatta tämän muovin on todettu kestävän myös todella hyvin kulutusta. Tämä muovi on suunnattu eritoten pelaajille, jotka arvostavat perinteisempää tuntumaa kiekoissa. Kestävyys XT-muovissa on kuitenkin selvästi parempi kuin DX-muovissa. Discs are marked rim color first, flightplate color after.

Tuotteista määritelty ekana rimmin väri, seuraavaksi kiekon keskiön väri esim. musta/ sinertävä + painomerkintä esim. 180. Painoyksikkö ilmoitetaan grammoissa. Kts. Mallikuva

 

Additional information about custom products

RECOMMENDED INSTRUCTIONS FOR CUSTOM ORDERS 

600x600px resolution for Mini's e.g (105mmx105mm) product size

2000x2000px resolution for a whole disc print e.g (217mmx217mm) product size

1000x1000px resolution for logos e.g (logo size 140x140mm)

UV-PRINT

With our printing method we can produce sharp and precise artwork without any color restrictions. The print is always a dull finish. We can't produce a glossy finish with this method. The shape of the product might affect the end looks of the print (e.g big dome etc). For a example a perfectly flat disc can be printed as a whole. A small dome doesn't affect the print. If the product has a a lot of differentiation in height it might not be possible to print on the whole disc.

We will edit every picture to be appropriate for our printing. If needed we will contact the customer before the actual printing on the disc.

Our specialty is printing on all plastic grades. We can print on all kinds of plastic e.g Dx, XT, Jawbreaker, premium plastics and all other blends. We have tested printing on all of the different plastics with great success.

COLOR VIBRANCY 6/0 CMYK+WHITE+GLOSS/PRIMER MACHINE CONFIGURATION

With this function we can also print to colored discs with the help of white color. Precision when printing pictures is 150-400 dpi per inch varying by the printing method used. Seeing picture-dots depends by the distance you are looking at the disc. In most cases 300 dpi is enough for colored pictures. With a inkjet printer 150 dpi accuracy is enough when printing on a normal paper. The more high quality picture you have, the better is the end quality. Our machines picture-accuracy is 1440 dpi.

NOTICE! Usually pictures from the internet are 72-96 dpi and below our recommendations.

COLOR PROFILE Frisbeemarket has made its own ICC-profile for our workloads. All colors might not look when printed like on your computer screen or image processing software.

FILE FORMATS We can use all kinds of file formats except ones made with Office tools. Unfortunately our system doesn't support them. For example SVG, PSD, AI, JPEG, PDF, PNG, EPS are great for our printing.

RESPONSIBILITY OF THE PRINT Customers are responsible for the graphics used on the special discs. Frisbeemarket doesn't take responsibility on the graphics.

FLAWS If you encounter flaws in the print contact our customer service immediately.

TECHNICAL SUPPORT If you have any questions regarding custom products you can contact us via Email: [email protected] or calling (+358) 456019055

Clear

+Make your own custom disc

SKU: 51346 Categories: ,
-10%
17,01 

11 | 5 | -1 | 3

-15%
14,36 

7 | 5 | -3 | 1

-30%
-20%
11,92 

2 | 5 | 0 | 1

-20%
9,52 

1 | 1 | 0 | 2

-10%
9,81 

10 | 5 | 0 | 3

-20%
8,72 

3 | 4 | 0 | 1

-20%
8,72 

3 | 3 | -1 | 1

-10%
16,11 

10 | 5 | -2 | 2

-15%
9,26 

5 | 5 | 0 | 1

-20%
15,92 

2 | 4 | 0 | 1 0.0

-10%
71,10 

   

-10%
15,21 

10 | 5 | -2 | 1

-15%
-20%
10,32 

4 | 2 | 0 | 3

-15%
15,21 

9 | 3 | 0.5 | 4